Desktop Computer ATX Power Supply Breakout Adapter


Desktop Computer ATX Power Supply Breakout Adapter
Stock Number: 38335 MI
  Be the first to review this item
$3.95
$2.95 


Availibilty: In Stock   Units: 72
Quantity 



SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet
DATA SHEET


Handy board to use to breakout & enable ATX power Supplies for testing or converting for other uses.
Slide Switch to enable Power Supply.
Power Active LED
Terminal strips for Outputs.
2 USB Type A Jacks. (Powered from the +5V terminal Strip output 5A max total)
All Outputs Fused at 5A
24Pin Connector for power supply, Terminal strips for Voltage breakout.
If power supply has 20Pin Connector; insert in board connector at the end with small Dot on the board.
Grounds (GND) are common
Paired by Voltage
-12V to GND, GND is the positive pole, -12V is the negative pole, the voltage is DC-12V
+12V to GND, +12V is the positive pole, GND is the negative pole, the voltage is DC+12V
-12V to +12V, +12V is the positive pole, -12 is the negative pole, the voltage is DC24V
NOTE: -12VDC is a Low current output, <300ma limitting the 24VDC to ~300mA (Some Supplies may have higher output Check Nameplate on your supply)
+5V to GND, +5V is the positive pole, GND is the negative pole, the voltage is DC+5V
+3.3V to GND, +3.3V is the positive pole, GND is the negative pole, the voltage is DC+3.3V
W: 69mm (2-11/16" L: 64mm (2-7/16" H: 14mm (5/8") WT: .08


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov